Table of Contents
Advertisement
4.3 ColorCut Pro - USB Connection confirmation (Cont)
IF the connection to your cutter is successful
then under the Output Device option
see the term USB Printing Support.
(After a short delay, the identifier 'LC600' may
appear after the description 'USB Printing
Support', however you don't need to wait for
this, and this may take a few minutes to appear).
Alternatively,
IF
option shows, [File Output]
connection has not been recognised.
Switch off the cutter and wait 10 secs. Unplug
the USB cable from your computer, and try a different port, then switch back on the
ColorCut engine. Wait unit the HOME screen is displayed on the LC600 LCD panel.
4.4 ColorCut Pro - Device Type
After confirming the USB connection is
connected successfully, please ensure the
DEVICE type is selected as LC600 E.
(This is not automatic, you need to select
your cutter as LC600). Click [OK] to confirm
and close the settings dialogue box.
Now continue to Step 5 (Tools).
Intec Printing Solutions - Manual for ColorCut LC600 Sheet fed Label Cutter ........................................................................ Page No: 32
C
you will
the
[OUTPUT
DEVICE]
D
then the USB
D
4) When the ColorCut Pro
B
application launches, click
on the SETTINGS button
B.
The ColorCut Pro [Settings]
dialogue box will appear.
A number of options and
settings can be viewed or
changed here.
C
E
Advertisement
Table of Contents
