Table of Contents
Advertisement
4.3 ColorCut Pro - USB Connection confi rmation (Cont)
IF the connection to your cutter is successful
then under the Output Device option C you will
see the term USB Printing Support.
(After a short delay, the identifi er 'SC5000'
may appear after the description 'USB Printing
Support', however you don't need to wait for
this, and this may take a few minutes to appear).
Alternatively,
IF
option shows, [File Output]
connection has not been recognised.
Switch off the cutter and wait 10 secs. Unplug
the USB cable from your computer, and try a different port, then switch back on the
ColorCut engine. Wait unit the HOME screen is displayed on the SC5000 LCD panel.
4.4 ColorCut Pro - Device Type
After confi rming the USB connection is
connected successfully, please ensure
the DEVICE type is selected as SC5000
E. (This is not automatic, you need to
select your cutter as SC5000). Click [OK]
to confi rm and close the settings dialogue
box.
Now continue to Step 5 (Tools).
Intec Printing Solutions - Manual for ColorCut SC5000 Auto-Sheet Digital Die-Cutter ............................................................ Page No: 32
the
[OUTPUT
DEVICE]
D
then the USB
D
4) When the ColorCut Pro
B
application launches, click
on the SETTINGS button
B.
The ColorCut Pro [Settings]
dialogue box will appear.
A number of options and
settings can be viewed or
changed here.
C
E
Advertisement
Table of Contents
