Table of Contents
Advertisement
Step 6. Connect the Checkout Column to the Inlet
Getting Started
The following pages contain instructions for installing the
checkout column in both of the inlets for the 6820 GC. Select the
procedures that apply to your GC.
Connect the column only to the inlet for conditioning. This
avoids contaminating the detector with material driven off of
the column.
Rotate the column on the hanger so that the column ends rise
from the bottom of the coil, making smooth curves to the inlet
and detector fittings. See
of the column itself to come in contact with oven interior
surfaces.
Column hanger
Column
Figure 13
Correct column orientation
Preparing for Operation
Figure
13. Avoid allowing any section
51
Advertisement
Table of Contents
