Table of Contents
Advertisement
Agilent remote start/stop cable, 03396-61010
General purpose analog signal cable, G1530-60560
Getting Started
Remote start/stop is used to synchronize two or more
instruments. For example, you might connect an integrator and
the GC so that the [Start]/[Stop] buttons on either instrument
control both of them. You can synchronize a maximum of ten
instruments using Remote cables. See
Figure 32
Agilent remote start/stop cable
Provides a 0 V to +1 mV output for recorders, and either -10 mV
or -100 mV to 10 V for data processing. See
Table
11.
Figure 33
General purpose analog signal cable
Preparing for Operation
Figure
32.
Figure 33
and
69
Advertisement
Table of Contents
