Table of Contents
Advertisement
In This Guide...
10
This document is concerned with installing the 6820 Gas
Chromatograph (the GC) in your laboratory, connecting it to
your data recording or processing equipment, and verifying that
it is operating correctly.
1
The 6820 Gas Chromatograph
A general description of the GC appears in this chapter. It
includes general warnings (heat, shock, etc.) that apply to the
entire GC.
2
Site Preparation
This chapter describes the things you must do (or have done)
before installing the GC in your laboratory.
3
Installing the GC
This chapter contains installation procedures for the GC. Most
of the steps apply to all GC systems. Some are optional, such as
plumbing for valve actuator air.
4
Preparing for Operation
Before checking the performance of your GC, perform the
preliminary steps described in this chapter.
5
Checking Performance
To check the performance of your GC, run the sample mixture
for your detectors as described in this chapter.
A
Swagelok Connections
The GC and gas tubing use many
familiar with
Swagelok
B
Factory Plumbing
The factory standard plumbing designs—how you may expect
the GC to be plumbed when you unpack it—appear here.
fittings. If you are not
Swagelok
connections, review these procedures.
Getting Started
Advertisement
Table of Contents
