Agilent Technologies 6820 Getting Started page 76

Preparing for Operation
C A U T I O N
76
19 ± 1 mm
Withdraw column
1-2 mm
Figure 39 Install the checkout column in an ECD
5 Leak-test the installation at the column nut. If necessary,
tighten fitting(s) further only enough to stop leakage.
Leak-detection fluids often leave contaminating residues. After each
application, the area checked should be rinsed with CH
and allowed to dry.
Detector fitting
Makeup gas adapter
with liner
Column nut
Septum
Column
OH (methanol)
3
Getting Started