Factory Plumbing - Agilent Technologies 6820 Getting Started

Agilent 6820 Gas Chromatograph
Getting Started
B

Factory Plumbing

FID 101
FID / FID 102
TCD 103
TCD / TCD 104
ECD 105
ECD / ECD 106
NPD 107
NPD / NPD 108
ECD/ FID 109
ECD/ NPD 111
TCD / FID 112
TCD / ECD 113
TCD / NPD 114
NPD / FID 115
The gas plumbing connections on the back panel and inside the
pneumatics carrier on the left side of the GC depend on the
detector or detectors installed.
The factory standard plumbing designs—how you may expect
the GC to be plumbed when you unpack it—appear in this
Appendix. They are listed above in Front detector / Back detector
format, with page references.
If additional flow control is needed, one or two 0.7 MPa
(100 psi) pressure regulators with gauges and shutoff valves are
available as Accessories G4322A and G4323A.
Agilent Technologies 99