Step 9. Connect the Appropriate Cables
WA R N I N G
Getting Started
Power
(Figure
25) and signal cables
back of the instrument. The other cables can be connected later.
LAN
Remote
Figure 27
Cable connections on the back of the GC
Two cables are supplied with every GC:
• Communications cable. The type depends on the GC
communications option purchased:
•
G1530-60600 RS-232 cable, or
•
LAN cable
• Power cord. Part number depends on your country and
power option.
Do not, at this time, connect the power cord to either the GC or a
power source. This avoids danger from accidentally heated zones,
the oven fan, and electrical wiring.
Preparing for Operation
(Figure
27) connect on the
Signal 1
Signal 2
RS-232
63