General Principle Of Operation; Solution Tank; Brush Head - HAKO Scrubmaster B75R Operating Manual

2.3

General principle of operation

Scrubmaster B75 R is a ride-on scrubber-drier for wet cleaning hard floor
surfaces.
In cleaning mode, the cleaning solution is supplied from the solution tank to
the rotating brushes in the brush head. Fresh water metering takes place
manually via an adjusting lever. When the machine is moving forwards, the
used cleaning agent is absorbed by the squeegee and conveyed into the
waste water tank.
Fig. 9:
2.3.1

Solution tank

The solution tank Fig. 9-5 is filled via a hinged opening. The solution tank has
a capacity of 75 litres. The level can be determined via a transparent hose
Fig. 9-6. Fresh water metering can be set via an adjusting lever Fig. 8-21.
2.3.2

Brush head

The brushes in the brush head Fig. 9-9 are driven by an electric motor. The
brush head is lowered with the brush head button Fig. 5-36. When actuating
the accelerator pedal, the brush motors and the water supply are switched on.
The floor is cleaned by the rotating brushes and the supply of cleaning solu-
tion. For maintenance purposes, the brushes can be decoupled via the foot
lever brush decoupler Fig. 7-8.
02-7175-00-00.fm
Operation
5
6
25
8
9
31