7.4.3
Creating a Measurement File
The actual measured values Count rate and Dose rate that are
shown in the "Measurement" display field can be stored in a
measurement file.
To do this, open the File menu, click on Open Logfile..., and
enter path and name. The file is stored with the file name ex-
tension ".log".
If another file of the same name exists, the system asks
whether that file shall be overwritten or the new measured data
shall be appended to the existing data.
Once you have pressed OK to confirm the entries, the meas-
urement logfile is created and the polling measured data is
stored in the scan interval you have defined. An open meas-
urement file is indicated by the name and the path of the
measurement logfile that appears in the top right-hand corner
of the window.
To terminate data storage, open the File menu and select the
Close Logfile menu item. No further data is recorded.
Open the File / View Logfile... menu to view the measurement
logfile.
For training and demonstration a prior recorded logfile can be
replayed by opening Replay logfile.
7-8
DB-067 E
RadEye G20
Iw/Tr/Ff 26.11.2012