Alarm Treatment Measures - EDAN F9 User Manual

F9, F9 Express Fetal & Maternal Monitor User Manual Alarms
information, but also record the historically physiological alarm, signal overlap alarm and US1,
US2 signal loss alarm messages with date and time information.
The monitor can display a maximum of 100 immediate alarm messages. When the storage is full,
it will delete the earliest alarm message automatically to store the new one.
The monitor can display a maximum of 800 historically physiological alarm， signal overlap alarm,
and US1, US2 signal loss alarm messages. When the total number exceeds 800, the alarms
messages cannot be stored.
Select the alarm reviewing key to open this menu. When you review the traces
with the word REVIEW shown in the background, the alarm reviewing menu displays historic
alarm review. Otherwise, it displays the immediate alarm review.
Each page displays 10 alarm records. The page mark "1/6" informs you that there are 6 pages and
the present one is page 1.
To review more records, select the alarm list and then rotate the control knob to switch to the
previous or next page.
Select OK to exit from this menu.
When the monitor is switched off, the power supply is cut off accidentally, or a new monitoring
starts, the immediate alarm messages will be cleared.
NOTE:
You can select Main Menu > Alarm > Review Alarms to set up On (by default) or OFF.
When the alarm review is enabled, the icon will appear in the main interface.

4.11 Alarm Treatment Measures

During monitoring, make sure there is at least one physician in the area where the alarm sound
can be heard or the alarm messages can be seen, so necessary measures can be taken when an
- 56 -