F9, F9 Express Fetal & Maternal Monitor User Manual
4
Select OK.
5.2.4 Switching Print Self-Check On or Off
You can choose to switch print self-check on or off:
1
Select the setup key
2
Select Recorder > Print Self-Check.
3
Select ON (default) or OFF.
4
Select OK.
5.2.5 Changing Printing End Volume
The monitor gives a tone when printing ends and this tone volume is adjustable.
1
Select the setup key
2
Select Recorder > Print Ending Beep.
3
Select High, Low (default) or OFF.
4
Select OK.
5.2.6 Changing Title Print Cycle
1
Select the setup key
2
Select Recorder > Title Print Cycle.
3
Select 10min (Default), 20min, 30min, 60min.
4
Select OK.
5.2.7 Switching Maternal Monitor Information On or Off
1
Select the setup key
2
Select Recorder > Maternal Monitor Information.
3
Select ON (default) or OFF.
4
Select OK.
Note:
When the Maternal Monitor Information switch is turned off, the HR trace, SpO2
trace switch will be turned on automatically. You can turn them off manually if
needed.
on the main interface.
on the main interface.
on the main interface.
on the main interface.
- 68 -
Printing