Appendix 2 Signal Input/ Output Connector - EDAN F9 User Manual

F9, F9 Express Fetal & Maternal Monitor User Manual

Appendix 2 Signal Input/ Output Connector

Accessory equipment connected to these interfaces must be certified according to the respective
IEC/EN standards (e.g. IEC/EN 60950 for data processing equipment and IEC/EN 60601-1 for
medical equipment). Furthermore all configurations shall comply with the valid version of the
system standard IEC/EN 60601-1. Anybody who connects additional equipment to the signal
input connector or signal output connector to configure a medical system must ensure that the
system complies with the requirements of the valid version of the system standard IEC/EN
60601-1. If in doubt, contact our technical service department or your local distributor.
DB9 Interface
D-Sub Interface
Pin Signal
1 +5V
2 Rx
3 Tx
4 485EN
5 0V Ref.
6 TA
7 TB
8 RA
9 RB
Pin Signal
1 US2
2 ISOCNS_RXD
3 ISOCNS_TXD
4 485EN
5 0V Ref.
6 TA
7 TB
8 RA
9 RB
10 DECG_SIGNAL
11 US1
12 +5V
13 TOCO
14 DECG_GND
15 EN
Input/Output
Output
Input
Output
Input
Output
Output
Input
Input
Input/Output
Input
Input
Output
Input
Output
Output
Input
Input
Input
Input
Output
Input
Input
- 170 -
Signal Input/Output Connector