EDAN F9 User Manual page 81

F9, F9 Express Fetal & Maternal Monitor User Manual
Trace
7.
Information List
8. Smart Note
9. HR Mark
10. SpO Mark
2
11. NIBP
12. Page Mark
CTG Analysis
13.
Result
14. Alarm Message
Wired
15. wireless
monitoring mark
A list of current date, time, print speed, ID, Name, FHR2 offset, HR,
SpO and TEMP is printed at the start of the monitoring and every 10
2
minutes/20 minutes/30 minutes/ 60 minutes(optional) afterwards.
The annotation of the event mark below.
The trace marked with "HR" is the maternal HR trace.
The trace marked with "SpO
In the real-time printing mode, each NIBP measurement result is
printed on the paper in the order of SYS/DIA/MAP/PR.
Each recorder paper pack has 150 pages. When you notice the page
mark comes to the end, remember to load new paper in time.
The CTG analysis results of FHR1 and FHR2.
It indicates the physiological alarm message(a), signal overlap alarm
message(b), US1 and US2 signal loss message(c).
In the process of monitoring, if one channel changes between wired
and
and wireless monitoring status, then wired mark (d) and wireless
mark(e) will be printed according to the current data source of the
channel.
" is the maternal SpO
2
- 70 -
Printing
trace.
2