Marking A Note - EDAN F9 User Manual

F9, F9 Express Fetal & Maternal Monitor User Manual
DECELERATIONS: the deceleration time.
SHORT TERM
VARIATION:
LONG TERM
VARIATION:
ANALYSIS START: the start time of the analysis.
ANALYSIS END:
During 10 to 60-minute of the timer, the monitor gives CTG analysis results every minute.
At the end of the printing, the recorder prints the CTG analysis results of this moment on the
recorder paper.
Be aware that CTG analysis result is a calculation output. It can be used as a reference to assist
medical personnel in making correct diagnosis, instead of replacing it.
NOTE:
Do not disconnect the ultrasound transducer(s) before the printing stops, otherwise the
analysis results will not be printed.

Marking a Note

8.2.6 *
When there is a significant event, you can press the MARK key on the front panel to add a note.
An event mark will appear on both the main interface and the recorder paper.
However, an event mark cannot clearly indicate an event. Smart Notes provides a list of
annotation for the events, including events that relate to drugs, positions, membranes, procedures,
antenatal, reasons and others.
8.2.6.1 Enabling/Disabling Smart Notes
To enable or disable Smart Notes,
1 Select the setup key
2 Select General > Smart Notes.
3 Select ON or OFF (default).
4 Select OK.
A smart note editing key
8.2.6.2 Annotating an event
Once Smart Notes is enabled, press the MARK key on the front panel to open the smart note list,
choose an event catalog and then choose an annotation from the list.
The annotation of this event will be printed in the top area of recorder paper during real-time
printing.
15 seconds.
the short-term variation analysis result.
the long-term variation analysis result.
the finishing time of the analysis.
on the main interface.
appears next to the Smart Notes item.
- 111 -
Fetal Monitoring Display