Operating Logics; Ep - Semi-Automatic Step By Step; A - Automatic; Ap - Automatic Step-By-Step - FAAC B614 Manual

6.2 OPERATING LOGICS

 
In all the logics:
- the STOP command has the priority and stops the
automation system from working
- the EMERGENCY command has the priority and opens
the automation system.
EP
- SEMI-AUTOMATIC STEP BY STEP
EP
The logic requires the use of just the
mand:
-
OPEN when the barrier is closed, it commands the
opening.
-
OPEN when the barrier is open it commands the

closing.

-
OPEN during the movement it stops
-
OPEN after the stop, it reverses in movement.
 
The CLOSE command always commands the closing.
A
- AUTOMATIC
A
Logic only requires the
-
OPEN when the barrier is closed, it commands the
opening. After the pause time, the barrier closes
again automatically.
-
OPEN when the barrier is open in pause mode, it
reloads the pause time. (Even the intervention of
the photocells reloads the pause time)
-
OPEN during opening is ignored.
-
OPEN during opening causes it to open again.
 
The CLOSE command always commands the closing.
AP
- AUTOMATIC STEP-BY-STEP
AP
The logic requires the use of just the
mand:
-
OPEN when the barrier is closed, it commands the
opening. After the pause time, the barrier closes
again automatically.
-
OPEN when the barrier is open in pause mode it
locks. (Even the intervention of the photocells
during the pause mode reloads the pause time)
-
OPEN during the opening locks.
-
OPEN during opening causes it to open again.
 
The CLOSE command always commands the closing.
b

- SEMI-AUTOMATIC B

b
Logic requires the use of the
commands:
-
OPEN when the barrier is closed, it commands the
opening.
-
CLOSE when the barrier is open it commands the
closing.
-
CLOSE during opening it causes reclosing.
-
OPEN during opening causes it to open again.
B614
OPEN
OPEN command:
OPEN
OPEN and CLOSE
bC
- SEMIAUTOMATIC
C
PRESENT ON CLOSING
bC
logic requires the use of the
opening and
activation of the
intentional and the barrier must be visible.
-
OPEN when the barrier is closed, it commands the
opening.
- Maintained
com-
C

- DEAD-MAN

C
Logic requires the use of maintained
CLOSE commands. The control must be activated
intentionally and the barrier must be visible.
- Maintained
- Maintained
- If the photocells are triggered, movement is
stopped.
P

- PARKING

P
Logic requires the use of the
commands:
-
OPEN when the barrier is closed, it commands the
opening.
-
CLOSE when the barrier is open it commands the
closing.
-
CLOSE during opening it causes reclosing after
opening.
-
OPEN during opening causes it to open again.
- The triggering of the photocells during closing
stops the movement, on disengagement the barrier
continues to close.
PA
- PARKING AUTOMATIC
com-
PA
Logic requires the
to be used.
-
OPEN when the barrier is closed, it commands the
opening. After the pause time, the barrier closes
again automatically.
-
OPEN when the barrier is open in pause mode, it
reloads the pause time. (Even the intervention of
the photocells reloads the pause time)
-
CLOSE when the barrier is open it commands the
closing.
-
CLOSE during opening it causes reclosing after
opening.
-
OPEN during opening causes it to open again.
- The triggering of the photocells during closing
stops the movement, on disengagement the barrier
continues to close.
38
b
ON OPENING/ PERSON
OPEN
CLOSE maintained on closing. The
CLOSE command on closing must be
CLOSE commands the closing.
OPEN commands the opening.
CLOSE commands the closing.
OPEN
OPEN and CLOSE
532297 - Rev.D
command on
OPEN and
and CLOSE
commands