Installing The Top Cover - FAAC B614 Manual

4.11 INSTALLING THE TOP COVER


If there is a flashing light kit, insert the connector
before closing the cover (see the chapter § 8).
1. (29) With the cover inclined, insert tabs 1 in
slots 2 on the box (arm side), then lower it on the
opposite side.
2. Close with the key: turn anticlockwise.
3. Check that the cover is secured: try to lift it from
both ends at the same time and then on the
opposite side.

For the seal to be effective, The door of the barrier
must be closed completely.
2
B614
1
28
29
532297 - Rev.D