Rectangular Arm Light Kit; Integrated Flashing Light; Articulated Arm Kit - FAAC B614 Manual

7 6
8. 8.
1
5
2
3 4
no
No device registered
cc
BUS 2easy line short-circuited
Er
BUS 2easy line error

8.4 RECTANGULAR ARM LIGHT KIT

Follow the assembly instructions provided with the
product folowing all the safety precautions indicated
in this manual.

8.5 INTEGRATED FLASHING LIGHT

1. Open the upper cover.
2. Fasten the flashing light with the screws provided
(4 2).
3. Connect the flashing light to terminal J21.
4. Set the operating mode (
gramming).
5. Close the upper cover.
6. Check that the device is working properly.

8.6 ARTICULATED ARM KIT

Follow the assembly instructions provided with the
product following all the safety precautions indicated
in this manual.
!
The installation of an articulated arm must take the
specific risks into consideration:
- IMPACT on the horizontal section of the arm, when
the arm is open
- CRUSHING in the jointed area, when the arm is
moving.
- Do not use joint to limit the height of the vehicles
passing.
- Indicate the maximum height of the vehicles con-
sidering the height of the arm itself.
- Apply a danger of crushing sticker on the arm in
the jointed area.
- Check the integrity of the wire during the half-yearly
scheduled maintenance.
B614
8 14
12
13
11
9 10
oS
in Advanced pro-
45
4 2
532297 - Rev.D