Encoder; Arm Lights; Integrated Flashing Light; Xf Radio Module - FAAC B614 Manual

ENCODER

The encoder wire is connected from the factory.

The encoder must always be connected in order for
the automation system to operate.

ARM LIGHTS

See the chapters § 8.4 for the connection.

INTEGRATED FLASHING LIGHT

35 See the chapter § 8.5 for the connection.

XF RADIO MODULE

36 See the chapter § 8.2 for the activation.

MAINS SUPPLY AND EARTHING

!
Do not remove the grounding done in the factory.
37 Connect the power cable to the main switch,
using PE, N, L terminals.
B614
Use a standard AWG 14 tripolar cable (not supplied).
6 A
N
L
33
LIGHT
BEAM
BLG
J18
COM
BLR
TRAFFIC
LAMP
J21
35
J7
36
MAIN SWITCH
PE
N
L
AC MAIN
37
532297 - Rev.D
J1