Using A Saved Program; Preheating A Program; Changing A Saved Program; Multi Cycle Cooking - Cadco CAPO-203 User Manual

• When the former program number is dialed in, the time indicator window should read "000", the
temperature window will read "032" and only the first [#1] cycle light should be illuminated.
This indicates a vacant program.
To Use a Saved Program:
• Using the "Program Selector Dial" find the number of the program you wish to use. The number
will be displayed in the "Program" window.
• Start the selected program by pressing the "Manual Start/Stop" touch pad.
• The tone will sound when the cooking cycle[s] have been completed.
Preheat a Program
• The program may be preheated by pressing the "Prog Start" touch pad in the "Program" section
of the control panel.
• When the program is activated in this manner you will hear the oven running but, the lights will
not be illuminated, and the timer will not count down.
• The oven is being preheated to a temperature higher than the program was set for to compensate
for the heat lost while the oven is being loaded.
• When the oven is preheated a continuous tone will sound. The operator then; opens the door,
loads the product, and closes the door.
• The lights are on showing the values of the chosen program, and the program is now running.
• A tone will indicate that the program has finished the programmed cooking cycle.
To Change a Saved Program
• Using the "Program Selector Dial" choose the number of the program you'd like to modify.
• Change the values you'd like to modify in each cycle.
• Save the new program by pushing and holding the "Prog Mem" touch pad in each cycle after the
changes have been made. After you have completed all the changes you are going to make in
each cycle, hold the "Prog Mem" touch pad for one final time [until you hear the continuous
tone].
• The revised program is now in memory and ready for use.

Multi Cycle Cooking

Multi cycle cooking allows the Line Chef™ Combination Oven to advance into a maximum of 4
separate cooking cycles automatically. Much of your food preparation will be a one cycle operation.
There will be times when some operators will want to ∆T and hold their foods overnight. Other times
when you may have found that three or four cycles work best for preparation of a certain food. The Line
Chef™ Combination Oven makes it possible to cook foods in as many as 4 separate, automatic,
preparation cycles.
This is a multi [2] cycle program you can use for quick rethermalizing of frozen entrees such as Lasagna:
• Press the touch pad next to the "Time" dial to illuminate "Cycle 1".
• Illuminate the "Set Temp" light next to the "Cavity" icon.
• Set the "Time" for 20 minutes using the "Time Dial".
11