Table of Contents
Advertisement
Industrial Gaussmeter IGM11 Operating Instructions
Chapter 9 Serial Interfaces
9 Serial Interfaces
9.1 Introduction
Via the provided serial interfaces as well as via the LAN interface, all functions of the
gaussmeter can be controlled by an external device (e.g. personal computer).
If the gaussmeter is externally controlled, and the connected computer is supposed to
carry out the data exchange, a connection is possible via this interface.
Basically, the device can also be controlled via the USB interface on the front panel.
For a user-programmed control, this interface requires a special driver on the
computer. This driver is provided in the form of a Windows
mainly for easy parametrization of the device. A corresponding set-up program (for
Windows
The data transfer itself, i.e. the protocol, is defined similar to the widely-used SCPI
programming language for measuring devices.
®
operating systems) will be provided.
magne t
MAGSYS
systeme
®
DLL. This interface is
Page 45 / 106
Advertisement
Table of Contents
