Settings; Overview - MAGSYS IGM11 Operating Instructions Manual

Industrial Gaussmeter IGM11 Operating Instructions
Chapter 6 Set-up Menu

6.3 Settings

6.3.1 Overview

All settings are displayed. You can scroll through the display with both buttons.
This is a display example.
Display of measuring value and unit
Parameter of the EIA-232 interface
Parameter of the EIA-485 interface
Parameter of the LAN interface. The MAC address is fixed.
Parameter of outputs 1..4 and inputs 1..3
Output 1 is set if the measuring value is between 120 and 140.
Output 2 is set if the measuring value is higher then 150.
Output 3 is set if the device measures and Output 4 on overflows.
Input 1 resets the peak value.
Input 2 has no function.
Input 3 compensates the magnetic offset.
The top button changes the measuring range.
The lower button has no function.
Version, serial number and calibration status of the device
Type, description, serial number and calibration status of the connected
measuring probe
magne t
MAGSYS
systeme
Page 35 / 106