Settings Of The Digital Outputs - MAGSYS IGM11 Operating Instructions Manual

Industrial Gaussmeter IGM11 Operating Instructions
Chapter 6 Set-up Menu

6.3.7 Settings of the Digital Outputs

Correspondingly, these settings hold for all four outputs. If more outputs are
furnished with the same function, these outputs are switched identically.
Settings of the digital output 1
RESET IF
Logic function
SET IF
ALWAYS
Constant
GREATER Relation
THAN
Relation
LESS THAN
IN RANGE
Relation
OUT OF Relation
RANGE
OVERFLOW
Overflow detection
Snnnnnn.nnn
Operands
Snnnnnn.nnn
Operands
Snnnnnn.nnn
Operands
Snnnnnn.nnn
Snnnnnn.nnn
Operands
Snnnnnn.nnn
magne t
MAGSYS
systeme
With the following function
the output will be reset.
With the following function
the output will be set.
The output will always be set
(reset).
This output will be set if the
displayed measuring value is
greater than the comparative
value.
This output will be set if the
displayed measuring value is
less than the comparative
value.
This output will be set if the
displayed measuring value
lies within both comparative
values..
This output will be set if the
displayed measuring value
lies beyond the range of both
comparative values
This output is set if an
overflow occurred.
Input of the operand for the
GREATER THAN relation
Input of the operand for the
LESS THAN relation
Input of the operand for the
IN RANGE relation
Input operand for the OUT
OF RANGE relation
Page 39 / 106