MAGSYS IGM11 Operating Instructions Manual page 93

Industrial Gaussmeter IGM11 Operating Instructions
Chapter 9 Serial Interfaces
9.12.7.16 :DGIO:SET:OUT
Description:
Mode:
Parameter:
Response:
*RST Value:
Example:
9.12.7.17 :DGIO:SET:OUT
Description:
Mode:
Parameter:
Response:
*RST
Example:
Set or query the lower limit value for the limit value check of each
output.
x represents outputs 1 to 4.
Only relevant for the selected compare operation.
Command or query
{<Value>} within the range of -999999.999 .. +999999.999
The significance is determined by the selected measuring unit.
Measuring unit
Tesla
A/m
Gauss
Oersted
like parameter
not relevant
send
send
receive
Set or query the upper limit value for the limit value check of each
output.
x represents outputs 1 to 4.
Only relevant for the selected compare operation.
Command or query
{<Value>} within the range of -999999.999 .. +999999.999
The significance is determined by the selected measuring unit.
Measuring unit
Tesla
A/m
Gauss
Oersted
like parameter
Value: not relevant
send
send
receive
:LOW[?]
{x}
Limit value unit
mT
A/m
G
Oe
:DGIO:SET:OUT2:LOW -1234.56<LF>
:DGIO:SET:OUT2:LOW?<LF>
-1234.56<CR><LF>
:HIGH[?]
{x}
Limit value unit
mT
A/m
G
Oe
:DGIO:SET:OUT2:HIGH 1234.56<LF>
:DGIO:SET:OUT2:HIGH?<LF>
1234.56<CR><LF>
magne t
MAGSYS
systeme
Example Value
123.4 mT 123.4
1.2 kA/m 1200.0
12.3 kG 12300.0
12.3 kOe 12300.0
Example Value
123.4 mT 123.4
1.2 kA/m 1200.0
12.3 kG 12300.0
12.3 kOe 12300.0
Page 93 / 106