Industrial Gaussmeter IGM11 Operating Instructions
Chapter 4 Control Elements and Connections
Please notice:
Access via LAN interface is displayed with "LAN".
Access authorization is not supported. This simplifies the
•
communication with the control programs.
Only one connection is possible at a time. If one connection has
•
been established, further connection attempts will be ignored.
A prompt will not be shown.
•
The communication is carried out with standard SCPI commands.
•
Normal Ping requests will be answered.
•
The MAC address (Media-Access-Control address) will be shown in
•
hexadecimal format in the overview function of the set-up menu.
This address is dedicated to the device and cannot be modified.
Figure 11 Display during LAN Operation
magne t
MAGSYS
systeme
Page 23 / 106