Table of Contents
Advertisement
magne t
MAGSYS
systeme
6 Set-up Menu
The following set-up options can be adapted individually in order to be able to use
the device for each application in
an optimal way.
By pressing both buttons for
approximately 2 seconds, the set-
up menu appears on the display.
In the set-up menu each selected menu item is displayed invertedly. To select the next
menu item, press the button NEXT. On reaching the last menu item, the cycle starts
anew.
To change or select a menu item, press the ENTER button shortly.
To exit the set-up menu or each sub-menu, press the ENTER-button longer.
6.1 Reset
To reset all parameters to factory
defaults, press and hold both
buttons when you switch on the
device. After about 5 seconds,
this display appears and all parameters will be reset to factory default. Please notice
that all numerical maximum values will be lost. The same applies to the zero-point
adjustments. After this procedure, normally a new zero-point adjustment becomes
necessary.
6.2 Settings Overview
To view the whole list of all set
parameters, select menu item
OVERVIEW. Via the two buttons
you can scroll through the output.
All currently set parameters will
be displayed. To quit the display press the ENTER button longer.
Page 34 / 106
Gaussmeter IGM11 Operating Instructions
Chapter 6 Set-up Menu
Advertisement
Table of Contents
