Table of Contents
Advertisement
magne t
MAGSYS
systeme
1 Safety Instructions
1.1 Safety Instructions for the Device
Use the measuring instrument only according to the operating instructions.
Do not replace any parts and do not modify this product without prior and written
consent by MAGSYS. Do not service this device. Return the device to MAGSYS
magnet systeme GmbH or to your local supplier for repair and maintenance to
ensure that all safety features remain.
Handling malpractice may result in damage to the device and possibly to injuries or
death of persons.
Do not dispose of this device in normal household garbage. Contact the
manufacturer for the proper disposal of this device.
Use only appropriate magnetic field probes for this measuring device.
Observe the labeling of the device before connecting a magnetic field probe.
Do not use the device in explosive environments or near to inflammable gases or
vapors.
Environmental Conditions:
This instrument has been designed for the use in rooms with low condensation. See
technical data.
1.2 Safety Instructions for Measuring Probes
Magnetic measurements should only be done in areas with a maximum voltage of
60V DC, 30V AC RMS. The magnetic field probes are not electrically insulated.
Please ensure that the probe holders and the housing are connected to protective
earth.
If you work in environments with voltages beyond 60V DC, 30V AC RMS or 42V
peak, act with particular caution because of electric shock hazard.
For measurements in high magnetic fields, observe the risks which might occur
through strong magnetic fields.
Page 6 / 106
Gaussmeter IGM11 Operating Instructions
Chapter 1 Safety Instructions
Advertisement
Table of Contents
