MAGSYS IGM11 Operating Instructions Manual page 88

magne t
MAGSYS
systeme
9.12.7.4 :SERI:COMA:MODE[?]
Description:
Mode:
Parameter:
Response:
*RST
Example:
9.12.7.5 :SERI:COMB:BAUD[?]
Description:
Mode:
Parameter:
Response:
*RST
Example:
9.12.7.6 :SERI:COMB:MODE[?]
Description:
Mode:
Parameter:
Response:
*RST
Example:
Page 88 / 106
Set or query the operating mode of the EIA-232 interface.
Command or query
{SCPI|SHOR|FLOW}
like parameter
Value: not relevant
send :SERI:COMA:MODE SCPI<LF>
send :SERI:COMA:MODE?<LF>
receive SCPI<CR><LF>
Set or query the bit rate of the EIA-485 interface.
Command or query
{1200|2400|4800|9600|14K4|19K2|38K4}
like parameter
Value: not relevant
send :SERI:COMB:BAUD 19K2<LF>
send :SERI:COMB:BAUD?<LF>
receive 19K2<CR><LF>
Set or query the operating mode of the EIA-485 interface.
Command or query
{BUS|P2P}
like parameter
Value: not relevant
send :SERI:COMB:MODE BUS<LF>
send :SERI:COMB:BUS?<LF>
receive BUS<CR><LF>
Gaussmeter IGM11 Operating Instructions
Chapter 9 Serial Interfaces