Industrial Gaussmeter IGM11 Operating Instructions
Chapter 8 Signal Interfaces
8.2 Wiring of the Inputs
Option1: The external control switches the external positive potential.
This option is preferably used in European countries in order to connect a PLC
control.
Option 2: The control provided by the customer switches the external negative
potential.
This option is preferably used in America and Japan in order to connect a PLC
control.
Insulated DC input
Used as current sinking inputs
Special features
Do not connect!
Figure 15 Signal Input Plus Switched
Insulated DC input
Used as current sourcing inputs
Special features.
Do not connect!
Figure 16 Signal Input Minus Switched
magne t
MAGSYS
systeme
Page 43 / 106