Settings Of The Digital Outputs - MAGSYS IGM11 Operating Instructions Manual

6.3.6 Settings of the Digital Outputs

Correspondingly, these settings hold for all four outputs. If more outputs are furnished
with the same function, these outputs are switched identically.
Page 38 / 92
Gaussmeter IGM11 Operating Instructions
Settings of the digital output 1
Logic function
RESET IF
SET IF
Constant
ALWAYS
Relation
GREATER
THAN
Relation
LESS THAN
Relation
IN RANGE
Relation
OUT OF
RANGE
Overflow detection
OVERFLOW
Operands
Snnnnnn.nnn
Operands
Snnnnnn.nnn
Snnnnnn.nnn
Operands
Snnnnnn.nnn
Snnnnnn.nnn
Operands
Snnnnnn.nnn
Chapter 6 Set-up Menu
With the following function
the output will be reset.
With the following function
the output will be set.
The output will always be set
(reset).
This output will be set if the
displayed measuring value is
greater than the comparative
value.
This output will be set if the
displayed measuring value is
less than the comparative
value.
This output will be set if the
displayed measuring value
lies within both comparative
values..
This output will be set if the
displayed measuring value
lies beyond the range of both
comparative values
This output is set if an over-
flow occurred.
Input of the operand for the
GREATER THAN relation
Input of the operand for the
LESS THAN relation
Input of the operand for the
IN RANGE relation
Input operand for the OUT
OF RANGE relation