Set-Up Menu; Reset; Settings Overview - MAGSYS IGM11 Operating Instructions Manual

Industrial Gaussmeter IGM11 Operating Instructions
Chapter 6 Set-up Menu

Set-up Menu

The following set-up options can be adapted individually in order to be able to use
the device for each application in an optimal way.
By pressing both buttons for ap-
proximately 2 seconds, the set-up
menu appears on the display.
In the set-up menu each selected
menu item is displayed invertedly. To select the next menu item, press the button NEXT.
On reaching the last menu item, the cycle starts anew.
To change or select a menu item, press the ENTER button shortly.
To exit the set-up menu or each sub-menu, press the ENTER-button longer.

Reset

To reset all parameters to factory
defaults, press and hold both but-
tons when you switch on the de-
vice. After about 5 seconds, this
display appears and all parame-
ters will be reset to factory default. Please notice that all numerical maximum values
will be lost. The same applies to the zero-point adjustments. After this procedure,
normally a new zero-point adjustment becomes necessary.

Settings Overview

To view the whole list of all set pa-
rameters,
OVERVIEW. Via the two buttons
you can scroll through the output.
All currently set parameters will be
displayed. To quit the display press the ENTER button longer.
Page 33 / 92
select menu item