Installation Procedures; Handling Considerations; Uncrating Procedure - Lucent Technologies SLC-2000 Remote Terminal Assembly Manual

®
SLC
-2000 Access System
RT Assembly Manual

Installation Procedures

Handling and Uncrating

Handling Considerations

NOTE
The shipping container is designed to lay lengthwise on the floor. Do not
transport or store the containers in a standing position.
NOTE
When transporting crates or holding in warehouse, do not stack more than
two bays high.
NOTE
When removing containers from the shipping van, place them on a dolly
truck in their horizontal shipping positions. Verify that the containers have
not been damaged. It is important that all containers be handled with care
and precautions be taken not to drop the units.

Uncrating Procedure

Step 1: Uncrate all material in quarters separate from the equipment room in
order to keep to an absolute minimum dust, lint, and other undesirable
particles which could create maintenance problems.
Step 2: All bays are shipped in a dust-protective antistatic plastic bag and
placed in a wooden container. The bay is laid in the container with the
front or equipment side up and is so marked. Uncrating should be done
in its shipping position.
:
:
:
Lucent Technologies
363-208-010
2
Issue 5 May 1997 2-1