Lucent Technologies SLC-2000 Remote Terminal Assembly Manual page 195

363-208-010
Parts Description
ED7C723-31 Group 2() DS1 Distribution /Feeder Cable Kit (OPTIONAL)
consisting of:
ED7C723-30 Group 13()
ED7C723-30 Group 14()
ED7C723-30 Group 15()
ED7C723-30 Group 16()
MDS Assembly Parts
The MDS assembly is provided by the manufacturer with the following individual
cable assemblies and hardware. The following listing can be used as an ordering
guide or as an installation checklist for material previously ordered. The material
that is indicated as optional is required for specific purposes. All pieces are
shipped with the shelf, but some parts (*) may be loosely attached or shipped in
separate containers.
J1C265AB-1 List 1 MDS Assembly
equipped with
ED7C723-32 Group 1
ED7C723-32 Group 2
ED7C723-32 Group 3
ED7C723-32 Group 4
ED7C723-32 Group 5
ED7C723-32 Group 6
ED7C723-32 Group 7
ED7C723-32 Group 8
ED7C723-32 Group 9
ED7C723-32 Group 10
ED7C723-32 Group 11()
(6) 801486341*
(2) 402444491*
(2) 846944411*
(2) 406203182*
(4) 406203976*
Cable Assembly
Cable Assembly
Cable Assembly
Cable Assembly
Cable Assembly
Cable Assembly
Cable Assembly
Cable Assembly
Cable Assembly
Cable Assembly
Cable Assembly
Cable Assembly
Cable Assembly
Cable Assembly
Cable Assembly
Screws, special round head
Studs, slotted
Labels, system identification
Fuses, 0.5 amp
Fuses, 5.0 amp
Issue 5 May 1997 5-3