Lucent Technologies SLC-2000 Remote Terminal Assembly Manual page 261

363-208-010 Appendix 2
NE00676-70 Local Alarm Relay Unit Installation Procedure
Rating (LARU and UIP):
MEDIUM Since the installation of the UIP may impact transmission this procedure
has a MEDIUM procedural risk rating, since there is a potential for a
service interruption to the end customer, if any procedural deviations or
procedure specific equipment failures occur during the procedure.
Equipment
Equipment List
The following equipment, apparatus, and tools are required to perform this
Modification Implementation Procedure.
Code
6018691341
NE00676-70, G1
848137972
NE00676-30 G1
NE00676-30 G2
NOTES:
I = This item may be ordered from Lucent Technologies-IMDARC by the
installer.
R = This item is required for installation of and is packaged with the DPFU.
Qty Note
1 Local Alarm Relay Unit Kit
1 R Local Alarm Relay Unit
1 R Mounting Plate e/ w 6-32 nuts and
lockwashers (3 each)
1 R Cable Assembly, Power
1 R Cable Assembly, Alarm
1 R AMP Header (P253/J253)
1 R MIP 363-208-500 (Instructions)
1 I Volt-Ohmmeter
Description
Issue 1.0 August 1998 3