Lucent Technologies SLC-2000 Remote Terminal Assembly Manual page 243

363-208-010
Applications
Reliance INTS
The first twenty-five channels from the MDS are cabled to the Misc. Pairs Cross-
connect block for communication access to the INTS. The INTS provides two DDS
lines, modem lines and dial-up lines; their use dependent upon whether dedicated
or dial-up access is required and the equipment configuration at the central office
with access to the operations systems. DDS1 is dedicated to the SARTS OS and
DDS2 to the Reliance Supervisory System.
The SLC -2000 TAP bus is cabled to the Misc. Pairs Cross-connect block for test
access to both the equipment and facility sides of the special service circuits.
ARM Shelf
P301
J301
Furnished with ED7C723-34 Group 1
TAP to ARM/MDS
MDS 1/2
P101B
J101B
Furnished with ED7C723-34 Group 13
VF Pairs Multiple
Figure A-11. Reliance INTS Typical Cross-connections
TAP A DP T1/R1
TAP A DP T/R
TAP A CU T/R
TAP A CU T1/R1
TAP A E/M
ED7C723-35 Group 1, 2, or 3 TAP A ET/M T
TAP A SZ
THCSC LAN P/N
THCSC FM/CLK
THCSC TX/RX
RLEDTSW
TAP B SZ
TAP B DP T1/R1
TAP B DP T/R
TAP B CU T/R
TAP B CU T1/R1
TAP B E/M
TAP B ET/MT
ED7C723-35 Grp 1, 2, or 3
T/R-CU 1/1
T/R-CU 1/2
T/R-CU 1/3
T/R-CU 1/4
T/R-CU 2/5
T/R-CU 7/25
Misc. Pairs DF
XCONN
EQ 1A T/R
EQ 1B T/R
EQ 1C T/R
EQ 2A T/R
EQ 2B T/R
EQ 2C T/R
FAC 1A T/R
FAC1B T/R
FAC 1C T/R
FAC 2A T/R
FAC 2B T/R
J305
FAC 2C T/R
TAP 1 INH
TAP 2 INH
ED7C723-35 Group 1, 2, or 3
OSS DDS T/R
OSS DDS T1/R1
MTAU DDS T/R
MTAU DDS T1/R1
Cross-connect TR834 MODEM T/R
VF Pairs
as required
TR834 CBL T/R
MLT CBL T/R
J801
MLT BYPASS T/R
ED7C723-35 Group 1, 2, or 3
Issue 5 May 1997
Reliance INTS
P305
P801
A-27