Wiring Of The Motor; Figure 21: Wiring Of The Motor - KEB COMBIVERT S6 Series Instructions For Use Manual

cONNecTION Of THe POWer UNIT

4.2.6.8 Wiring of the motor

Legend
1 KEB COMBIVERT
2 Motor cable
1)
3 Three-phase motor
4 Temperature monitoring
Figure 21: Wiring of the motor
Apply the shield at both ends over a large area on the functional earth (shielding plate or mounting plate)
1)
Temperature monitoring is optionally available, =>
2)
NOTICE
62
➀ ➁
Control
P A/K
9 5
X1C
10
6
U
X1A V
W
2)
connection of the temperature monitoring
• Do not lay the connection cable of the motor temperature detection
(also shielded) together with the control cable !
• The connection cable of the temperature detection inside the motor
cable is only permissible with additional shielding (double shielding) !
• The input of the temperature detection has basic isolation.
➂
④
U
V
W
Instructions for use „Control unit".