Redundancy; Preset Template; Hot Backup For Input Source; Factory Reset - NovaStar MCTRL R5 User Manual

Independent Controller MCRL R5
User Manual

5.6.5 Redundancy

Set the current device as the primary or backup device.

5.6.6 Preset Template

Save configuration information, rotation parameters, and user settings information as
templates. Users can add 10 templates at most.

5.6.7 Hot Backup for Input Source

Set backup source for the current input source. The backup source should be other
types of input source supported by the device.

5.6.8 Factory Reset

Reset the current device to factory settings.

5.6.9 Go Homepage (s)

The current page stays for how many seconds before going homepage when there is
no actions.

5.6.10 Greyscale Adjustment

Adjust greyscale among the range from 4 to 15 for the LED display screen.

5.6.11 Hardware Version

View the hardware version of current device. In case of new version release, access
NovaLCT through PC to upgrade the hardware version.

5.7 Communication Settings

Set the communication mode and network parameters.
Two communication modes are provided: USB Preferred and LAN Preferred.
When the USB and Ethernet ports are connected at the same time, the system will
use the communication mode set by the user.
www.novastar.tech
5 Menu Operations
13