Fronius Tps/I Package - ABB Fronius TPS 320i Applications Manual

2 Installation

2.3.2 Fronius TPS/i package

2.3.2 Fronius TPS/i package
Downloading of Fronius TPS/i package
Continues on next page
18
1 Download and install the Fronius TPS/i package from the Add-Ins tab in
Robotstudio. (Common tags: RobotWare-Addin). Start the Installation
Manager and build your robot system.
Note
Do not forget to add the Fronius TPS/i product in the Products tab. You
do not need a license for the package.
xx1900002395
2 As the TPS/i package is an add-in, RW-Add-In loaded Welder must be
selected in the Drive Module section (Option tab) for each associated welding
robot.
xx1900002396
3 Select the Install Power Supply option for each welding robot, and select
the fieldbus. If the system has the SmarTac option, you can select Include
Application manual - Fronius TPS 320i/400i/500i/600i with RI-FB inside/i interface
© Copyright 2004-2021 ABB. All rights reserved.
3HAC065012-001 Revision: C