Swing End Assembly - KidKraft Appleton Play System F24148 Installation And Operating Instructions Manual

Step 2: Swing End Assembly
A: Attach 2 (2803) SW Posts to (4920) SW Upright using 2 (G4) 5/16 x 4" Hex Bolts (with lock washer, flat washer
and t-nut). (fig. 2.1)
B: Attach (4921) SW Support to both (2803) SW Posts and (4920) SW Upright using 3 (G5) 5/16 x 4-1/2" Hex
Bolts (with lock washer, flat washer and t-nut). (fig. 2.1)
2803
2803
Wood Parts
2 x SW Post 2 x 4 x 79-1/2"
2803
1 x SW Upright 2 x 4 x 50-1/2"
4920
1 x SW Support 5/4 x 4 x 48-1/2"
4921
Fig 2.1
G5
2 x
3 x
4921
Hardware
5/16 x 4" Hex Bolt
G4
(5/16" lock washer, 5/16" flat washer, and 5/16" t-nut)
5/16 x 4-1/2" Hex Bolt
G5
(5/16" lock washer, 5/16" flat washer, and 5/16" t-nut)
15
4920
G4