Table of Contents
Advertisement
3-2-3
Using the Multi-sheet Bypass Feeder
Use the multi-sheet bypass feeder (MBF) to print transparencies, labels,
envelopes or postcards in addition to making quick runs of paper types
or sizes that are not currently loaded in the paper cassette.
Acceptable print media are plain paper with sizes ranging from 4x6,to
Legal 14", the largest size acceptable, and weighing between 16lb and
2
50lb/ 60g/m
and 190g/m
The following table summarizes the print media allowed as well as their
stacking height limit.
Paper Type
Letter (Xerox 4024DP 20lb)
Envelope (Monroe brand
Com#10)
Transparency (Xerox 3R2780)
Label (Xerox 3R4469)
*
The height is measured with the stack of sheets laid, without being touched
by hands, on a flat surface.
• Always load only the print media specified in 3-1 Selecting Print
Media to avoid paper jams and print quality problems.
• Do not hit the multi-sheet bypass feeder or rest your hands on it;
otherwise the feeder may be damaged or detached from the printer.
• Remove any curl on postcards, envelopes, and labels before loading
them into the multi-sheet bypass feeder.
• Do not load paper into the multi-sheet bypass feeder during printer
installation. Be sure to wait until the printer's power is turned on and the
printer becomes ready for the first time, then load paper.
2
.
Stacking Height Limit
80 sheets or 9mm (max)*
10 envelopes or 9mm (max)*
40 sheets or 9mm (max)*
40 sheets or 9mm (max)*
•
Print Media
47
Advertisement
Table of Contents
