Mechanical Data - Pentair SUDMO IntelliTop 2.0 Operating Instructions Manual

6.5.

Mechanical data

Fig. 5: Dimensional drawing (for models with 1 to 3 solenoid valves)
*) Plastic self-cutting screws:
Diameter 3 mm, length approx. 10 mm; e.g. Ejot PT screw K 30 x 10;
max. tightening torque 0.4 Nm
(after completely screwing in the screw, loosen it again by one half turn)!
22
Securing the hood
by lead seal (max Ø2) or
optionally by plastic self-
cutting screws *)
english
Technical Data
M16x1.5 (2x)
G1/4 (2x)
G1/8 (3x)