Functions / Options / Designs; Structure Of The Control Head - Pentair SUDMO IntelliTop 2.0 Operating Instructions Manual

5.3.

Functions / options / designs

5.3.1.

Structure of the control head

Electronics module
with connection
terminals, service
interface and Teach-In
buttons (rear)
Solenoid valve 3
Cable
glands
(rear)
Sealing lug on the
lower housing part;
(for securing the hood
using a lead seal or plastic
self-cutting screws)
2 locking screws
(shoulder screws M5);
no sealing function,
merely as protection against
pulling off from the hub flange
Fig. 1: Structure of control head IntelliTop 2.0 (with 3 solenoid valves)
14
english
System Description
Position measuring system
with LEDs in 3 colors
Solenoid valve 1
Solenoid valve 2
Mechanical manual
control (red lever)
Flow restriction screw(s)
for P and R (2 per
solenoid valve)
Locking groove (3x)
Supply pressure
connection(1/P)
Solenoid valve 1 (2/A1)
Solenoid valve 2 (2/A2)
Solenoid valve 3 (2/A3)
Working connections
(2/A1...3)
Exhaust air connection (3/R)
(Silencer in the exhaust
air connection (3/R) not
shown)