Authorized Use; Export Restrictions - Pentair SUDMO IntelliTop 2.0 Operating Instructions Manual

Authorized Use

2. AUTHORIZED USE
Incorrect use of the control head IntelliTop 2.0 may be dangerous to people, nearby equipment and the
environment.
• The control head has been designed for use as actuation of pneumatically operated process valves and / or
for recording the switching states of these.
• The authorized data, the operating conditions and conditions of use specified in the contract documents and
operating instructions are to be observed during use. These are described in Chapter "6. Technical Data".
• In view of the large number of application options, check and, if required, test prior to installation whether the
control head is suitable for the specific application case.
If you are unsure, please contact your Pentair-Südmo contact.
• The device may be used only in connection with third-party devices and components which have been rec-
ommended or approved by Pentair Südmo.
• Any unauthorized reconstructions and changes to the control head are prohibited for safety reasons.
• Correct transportation, correct storage and installation as well as careful operation and maintenance are
essential for reliable and problem-free operation.
• For connecting the control head, use line installations that do not cause any mechanical stresses.
• Use the device only as intended.
2.1.

Export restrictions

If exporting the system/device, observe any existing restrictions.
english
9