Structure Of The Control Head (Feedback Top) - Pentair SUDMO IntelliTop 2.0 Operating Instructions Manual

System Description
5.3.2.

Structure of the control head (feedback top)

Electronics module
with connection
terminals, service
interface and
Teach-in buttons
(T1 to T3)
Cable
gland
2 locking screws (shoulder
screws M5); no sealing function,
merely as protection against
pulling off from the hub flange
Fig. 2: Structure of a feedback top (IntelliTop 2.0 without solenoid valves)
Position measuring
system with LEDs
in 3 colors
Pressure relief valve
(rear side)
Sealing lug on the lower
housing part; (for securing
the hood using a lead
seal or plastic self-cutting
screws)
Locking groove (3x)
Cable gland
english
15