Honda HHT25S Manual page 42

HHT25S•HHT35S
11. GEAR CASE
GREASING
1. Move the ignition switch to the STOP position and disconnect
the spark plug cap from the spark plug.
2. Remove the 8 x 10 mm hex bolt from the gear case.
3. Fill the gear case with grease until grease runs out of the bolt
hole.
Recommended grease
4. After filling with grease, tighten the 8 x 10 mm hex bolt to the
specified torque.
TORQUE: 10N•m (1.0 kg•m, 89 in•lb)
NLGI No. 2 general purpose grease
x
8 10 mm HEX BOLT
MAINTENANCE
BOLT
HOLE
3-13