Honda HHT25S Manual page 122

HHT25S•HHT35S
THROTTLE TRIGGER SPRING/THROTTLE
TRIGGER INSTALLATION
1. Set the throttle trigger spring on the throttle trigger as shown.
Pass the hook of the throttle trigger spring through the hole in
the throttle trigger.
2. Set the throttle cable end in the hole in the throttle trigger.
3. Install the throttle trigger on the L. throttle trigger grip.
4. Install the throttle trigger interlock as shown. Push the throttle
set button and make sure the hook on the throttle trigger
interlock is set on the throttle trigger while installing the R.
throttle trigger grip. This keeps the throttle trigger interlock in the
right position and prevents the interlock from falling into the
groove of the ignition switch.
FRAME ASSEMBLY / HANDLEBAR
HOOK
THROTTLE
TRIGGER
SPRING
HOLE
THROTTLE TRIGGER
THROTTLE
CABLE
THROTTLE TRIGGER
INTERLOCK
THROTTLE
TRIGGER
LEFT
THROTTLE
GRIP
THROTTLE SET
BUTTON
PUSH
HOOK
THROTTLE
LEVER
11-7