Honda HHT25S Manual page 125

FRAME ASSEMBLY / HANDLEBAR
4. LOOP HANDLE/THROTTLE TRIGGER
DISASSEAMBLY/REASSEMBLY
Disconnect the throttle cable, ignition switch connector, and the ground cable. You must remove the frame pipe assembly from the
engine in order to remove/install hanger holders A and B
R. THROTTLE
TRIGGER GRIP
5 x 20 mm
PAN SCREW (2)
THROTTLE CABLE
THROTTLE LEVER
THROTTLE TRIGGER SPRING
5 mm HEX NUT (4)
FRAME PIPE
INSTALLATION:
P. 11-2, P. 11-4
11-10
(
P. 11-1
4 x 20 mm
SELF TAPPING SCREW (4)

5 x 30 PAN HEAD BOLT (4)
DRIVE CABLE
,
P. 11-4).
THROTTLE TRIGGER
INTERLOCK
THROTTLE LEVER CAP
LOOP HANDLE
INSTALLATION: P.11-8
TORQUE: 3 N•m (0.3 kg•m, 27 in•lb)
HHT25S•HHT35S
IGNITION SWITCH
INSPECTION: P. 11-9
5 mm HEX NUT (2)
L. THROTTLE
TRIGGER GRIP
5 mm HEX NUT
HANGER HOLDER B
INSTALLATION: P. 11-8
HANGER HOLDER A
INSTALLATION: P. 11-8
5 x 20 PAN HEAD SCREW
TORQUE: 3 N•m (0.3 kg•m, 27 in•lb)
INSTALLATION:
P. 11-11, P. 11-12