Ar5 Software "Set Ar5 Temp; Installing Set Ar5 Temp; Starting Ar5 Refractometer; Using Set Ar5 Temp - Ametek Reichert AR5 User Manual

Instructions for Use
(continued)

AR5 Software "Set AR5 Temp"

To control the temperature of your AR5 you have to use the program "Set AR5 Temp" sent with the AR5.

Installing Set AR5 Temp

To start the installation you need administrator rights on your PC.
After inserting the CD sent with your AR5, follow the windows standard installation procedure:
Just execute the SETUP.exe, read the shown license agreement carefully and follow the instructions.

Starting AR5 Refractometer

The device has to be connected to the provided power supply. Now connect the measuring head and your
PC by using the serial cable sent with your AR5.

Using Set AR5 Temp

After connecting your AR5 and your PC, start the software SET AR5 TEMP by double-clicking it. The Main
Menu will be displayed now.

Main Menu "Set AR5 Temp"

Connect your refractometer to the PC by selecting the correct COM-Port. Enter a temperature value ac-
cording to temperature the sample will be measured. This temperature must be between 20 and 25°C,
otherwise the peltier thermostat will not work.
Figure IS-02, COM-Port
20 1400700-101 Rev. A