Instructions for Use
(continued)
PC Program Config
On the enclosed CD you can find the control software ARConfig. Copy the application "ARConfig.exe"
and the files "lmodule.dll" and "P302.lm2" to your computer.
Perform the following instructions to install the ARConfig program.
1. Connect the AR5 with the PC by using the serial port.
2. Now start the program ARConfig.exe on your computer.
Start software
Choose your default language. You then have the opportunity to login as User read only or User read/
write. If you select User read/write you have to type in your password. The User profile Service is re-
served to the Reichert customer service. Confirm your selection by clicking OK.
Figure IS-03, Start-Window Config
Menu
Select the COM-Port the AR5 is connected to.
Figure IS-04, Menu P302
1400700-101 Rev. A
21