Table of Contents
Advertisement
Instrument Setup
Connecting AR5 with Display
Connect the cable of the AR5 display to the blue port in the middle of the three ports of the AR5 measuring
head. Refer to Figure IS-01.
Now you have to put in the clip of the display in to the opening of the backside of the measuring head.
Refer to Figures IS-04 and IS-05.
Figure IS-05, Opening at the Backside of AR5 Measuring Head
The display will automatically snap to the housing of the measuring head.
Accessories
The following accessories are included with this instrument:
•
Sample chamber cover
•
AR5 sleeve
•
Dust filter - Viledon P 15 /150 S
•
User Guide
18
(continued)
Clip
Figure IS-04, AR5 Display Clip
Opening
1400700-101 Rev. A
Advertisement
Table of Contents
